2N5151-220M 2n5153-220m document number 3630 issue 1 semelab plc. telephone +44(0)1455) 556565. fax +44(0)1455) 552612. e-mail: sales@semelab.co.uk website: http://www.semelab.co.uk semelab plc reserves the right to change test conditions, parameter limits and package dimensions without notice. information f urnished by semelab is believed to be both accurate and reliable at the time of going to press. however semelab assumes no responsibility for any errors or omi ssions discovered in its use. semelab encourages customers to verify that datasheets are current before placing orders. description the 2N5151-220M and the 2n5153-220m are silicon expitaxial planar pnp transistors in to-220 (jedec to-257ab) metal case intended for use in switching applications. the complementary npn types are the 2n5152-220m and 2n5154-220m respectively absolute maximum ratings t case = 25c unless otherwise stated 2n5153 2n5151 high speed medium voltage switches v cbo collector ? base voltage v ceo collector ? emitter voltage (i b = 0) v ebo emitter ? base voltage (i c = 0) i c continuous collector current i c(pk) peak collector current i b base current p tot total dissipation at t amb = 25c t case = 50c t case = 100c t stg storage temperature range t j operating junction temperature -100v -80v -5.5v -5a -10a -2.5a 4.4w 21.4w 14.3w ?65 to +200c 200c mechanical data dimensions in mm (inches) dia. 2.65 2.75 0.89 1.14 0.70 0.90 4.70 5.00 10.41 10.67 3.56 3.81 16.38 16.89 13.39 13.64 10.41 10.92 12.70 19.05 2.54 bsc 123 to-220 (to-257ab) pin 1 ? base pin 2 ? collector pin 3 ? emitter
a ma a a ma v pf s s r thj-case r thj-amb 7 40 parameter test conditions min. typ. max. unit thermal resistance junction-case max thermal resistance junction-ambient max c/w c/w -1 -1 -500 -50 -1 -1 80 -0.75 -1.5 -1.45 -2.2 -1.45 20 30 90 20 15 250 20 3 0.5 1.3 2N5151-220M 2n5153-220m document number 3630 issue 1 semelab plc. telephone +44(0)1455) 556565. fax +44(0)1455) 552612. e-mail: sales@semelab.co.uk website: http://www.semelab.co.uk semelab plc reserves the right to change test conditions, parameter limits and package dimensions without notice. information f urnished by semelab is believed to be both accurate and reliable at the time of going to press. however semelab assumes no responsibility for any errors or omi ssions discovered in its use. semelab encourages customers to verify that datasheets are current before placing orders. i ces i cev i ceo i ebo v ceo(sus) v ce(sat) v be(sat) v be h fe c cbo h fe t on t off collector cut off current collector cut off current collector cut off current emitter cut off current collector emitter saturation voltage collector emitter saturation voltage base emitter saturation voltage base emitter voltage dc current gain collector base capacitance small signal current gain turn on time turn off time v ce = -60v v be = 0 v ce = -100v v be = 0 v ce = -60v t case = 150 c v be = 2v v ce = -40v i b = 0 v eb = -4v i c = 0 v eb = -5.5v i c = 0 i c = -100ma i b = 0 i c = -2.5a i b = -250ma i c = -5a i b = -500ma i c = -2.5a i b = -250ma i c = -5a i b = -500ma i c = -2.5a v ce = -5v i c = -50ma v ce = -5v i c = -2.5a v ce = -5v i c = -5a v ce = -5v t case = -55 c i c =2.5a v ce = -5v i e = 0 v cb = -10v f = 1mhz ic = -0.1a vce = -5v f = 1khz ic = -0.5a vce = -5v f = 20mhz i c = -5a v cc = 30v i b1 = -0.5a i c = -5a v cc = 30v i b1 =-i b2 = 0.5a electrical characteristics for 2N5151-220M (t case = 25 c unless otherwise stated) * pulse test t p = 300 s , < 2% thermal data
2N5151-220M 2n5153-220m document number 3630 issue 1 semelab plc. telephone +44(0)1455) 556565. fax +44(0)1455) 552612. e-mail: sales@semelab.co.uk website: http://www.semelab.co.uk semelab plc reserves the right to change test conditions, parameter limits and package dimensions without notice. information f urnished by semelab is believed to be both accurate and reliable at the time of going to press. however semelab assumes no responsibility for any errors or omi ssions discovered in its use. semelab encourages customers to verify that datasheets are current before placing orders. a ma a a ma v pf s s parameter test conditions min. typ. max. unit -1 -1 -500 -50 -1 -1 80 -0.75 -1.5 -1.45 -2.2 -1.45 50 70 200 40 35 250 50 3.5 0.5 1.3 i ces i cev i ceo i ebo v ceo(sus) v ce(sat) v be(sat) v be h fe c cbo h fe t on t off collector cut off current collector cut off current collector cut off current emitter cut off current collector emitter saturation voltage collector emitter saturation voltage base emitter saturation voltage base emitter voltage dc current gain collector base capacitance small signal current gain turn on time turn off time v ce = -60v v be = 0 v ce = -100v v be = 0 v ce = -60v t case = 150 c v be = 2v v ce = -40v i b = 0 v eb = -4v i c = 0 v eb = -5.5v i c = 0 i c = -100ma i b = 0 i c = -2.5a i b = -250ma i c = -5a i b = -500ma i c = -2.5a i b = -250ma i c = -5a i b = -500ma i c = -2.5a v ce = -5v i c = -50ma v ce = -5v i c = -2.5a v ce = -5v i c = -5a v ce = -5v t case = -55 c i c =2.5a v ce = -5v i e = 0 v cb = -10v f = 1mhz ic = -0.1a vce = -5v f = 1khz ic = -0.5a vce = -5v f = 20mhz i c = -5a v cc = 30v i b1 = -0.5a i c = -5a v cc = 30v i b1 =-i b2 = 0.5a electrical characteristics for 2n5153-220m (t case = 25 c unless otherwise stated) * pulse test t p = 300 s , < 2%
|
